Fluoropolymer (TEFLON)

Product List Teflon

One coat

These solvent-based liquid coatings are formulates with special blends of fluoropolymer and other high-performance resins to improve toughness and abrasion resistance. Because the film components stratify during baking, most of the fluoropolymer properties (such as low friction and nonstick character) are retained. The resins provide adhesion and abrasion resistance. These products can sometimes be applied to smooth, clean metal. Bake requirements vary, depending on the specific coating, from 165 ํC/325 ํF to 315 ํC/600 ํF.

420-104                                One coat Gray                                                                    

420-106                                One coat Metallic Gray                                                   

420-109                                One coat Metallic Black                                  

463-119                                One coat Metallic Black  

959-205                                Primer Brown                                    

                                               

Teflon –S(Solvent based liquid coating)

Dry lubricant coatings are special versions of Teflon-S® technology designed to provide lubrication under high Pressure/Velocity (PV) conditions. These are solvent-based, one-coat systems which are usually cured between 260 C/500 F and 370 ํC/700 ํF.

954-103                                One coat Black                                                                  

958-203                                One coat Black                                  

958-207                                One coat green                                   

958-303                                One coat Black                  

958-313                                One coat Black                                                                  

958-417                One coat Blue                                    

3300-001              One coat Black                  

 

PTFE(Polytetrefluoroethylene)

PTFE (Polytetrafluoroethylene) nonstick coatings are two-coat (primer/topcoat) systems. These products have the highest operating temperature of any fluoropolymer (290 ํC/ 55 ํF), an extremely low coefficient of friction, good abrasion resistance and good chemical resistance. PTFE is available only in water-based liquid form.

455N-11206        TC Sparkling black          

459N-415             Primer Black

459N-41105        Primer Black

850N-314*           Primer Green                                                                     

850N-321*           Primer Gray       

851N-214             Topcoat Green                                                   

857N-125             Primer Black

*Use with 850-7799 (Acid Accelerator)          

          

FEP(Fluorinated Ethylene Propylene copolymer)

FEP (Fluorinated Ethylene Propylene copolymer) nonstick coatings melt and flow during baking to provide non-porous films. These coatings provide excellent chemical resistance.
In addition to low friction, FEP coatings have excellent nonstick properties. Maximum use temperature is 205 ํC/400 ํF. FEP is available in water-based liquid and powder forms.

856N-200             Topcoat Clear                                                                                    

856N-204             Topcoat Green                                                                   

856N-211             Topcoat Gray                                     

959-205                                Primer Brown    

 

PTFE/PFA          

855N-012             Primer Blue                                                                                        

855N-023             Primer Black                                      

855N-101             Mid coat Black  

855N-500             Topcoat Clear            

                        

PFA (Perfluoroalkoxy)

Like FEP, PFA (Perfluoroalkoxy) nonstick coatings melt and flow during baking to provide non-porous films.PFA offers the additional benefits of higher continuous use temperature (260 ํC/500 ํF), film thicknesses up to 1,000 micrometers (40mils) and greater toughness than PTFE or FEP. This combination of properties makes PFA an excellent choice for a wide variety of uses, especially those involving chemical resistance. PFA is available in both water-based liquid and powder forms.

420-703                                Primer Black                                                                      

420-704                                Primer Green                     

857N-110             Topcoat Clear                                    

857N-210             Topcoat Clear    

857N-247             Topcoat Dark Pewter

MP-10                   Topcoat Clear

MP-310                 Topcoat Clear

MP-502                Filled Topcoat Clear

 

ETFE (Ethylene/Tetrafluoroethylene)

ETFE is a copolymer of Ethylene and Tetrafluoroethylene, and is also sold under the Tefzel® trademark. Although not fully fluorinated, ETFE has excellent chemical resistance and can operate continuously at 150 ํC/300 ํF. This resin is the toughest of the fluoropolymers and can be applied at film builds up to 1,000 micrometers (40 mils) to provide a highly durable finish. ETFE is available in powder form.

532-6200              Topcoat White

  • Topcoat Clear
  • High Build Mid coat Green           

699N-129             Primer                  


Back to Product List...